What is the reason for the van filter failure?Is there any good solution?
Often, van filter plates have problems after several years of use, causing some grooves to be washed away at the corner.Once dents, it expands rapidly, which will affect the formation of the filter cake.Therefore, the filter plate should be replaced in time to prevent damage to other equipment.
Of course, you can also be used, mainly including the following:
1.Clean the grooves with repair tools;
2.The patch agent used is adjusted in proportion, and the imbalance directly affects the repair effect;
3.Apply the agent to the trench to avoid uniform coating;
4.Quickly cover the filter cloth and squeeze the filter plate together to ensure that the filter plate and the filter cloth stick together;
5.After a short time, check for sticking to it.If it is good, it can work properly.
The van filter works when the filter plate is set to form a filter chamber.The pits and bumps on the filter plate are used to support the filter cloth.There are open holes in the middle and corners to assemble the entire channel.Press the filter plate.Seal the filter cloth to complete the dehydration process.If the sludge on the filter plate is too thick or the dry block is still present, the inlet will be blocked.At this time, the filter plate is easily damaged due to pressure.
Van filter is made of filter materials like plastic, rubber, cast iron, cast steel, carbon steel, stainless steel.If the quality of the filter plate is problematic, problems such as foaming, inconsistency and casting cracks may arise.
