Application of filter filter in lubricating oil



         Filfilter ensures the cleanliness of lubricating oil: theoretically, without no foreign body, the bearing can run for a long time in infinite life without generating fatigue load.However, it is difficult to raise the cleaning level of lubricating oil to a state completely without these tiny particles, but by purifying the oil filter, the oil cleanliness can be increased to less than 0.001% of "mechanical impurities".During operation.Simple and easy to use and low price.The filter filter completely solves the problem of oxidation and degradation of lubricating oil.Traditional oil filtration equipment can only filter impurities of more than 5 μm, as well as colloidal impurities and saponification caused by emulsification and oxidation in lubricating oil.There is nothing to be done to clean it up.Online purification can effectively remove the water mixed in the oil, particulate impurities below 5 μm, corrosive salt and colloids, and saponification formed by oxidation and deterioration, and completely solve the problems of oxidation and deterioration of lubricating oil.This is a new technological breakthrough, especially colloidal removal, a problem currently inaccessible to various other oil filtration technologies.The filter filter greatly extends the service life of lubricating oil, improves the utilization rate of resources, and effectively protects the environmental metal particles from the oxidation and deterioration of catalytic oil.Under the synergy of water, harmful substances and oil are produced.The reaction accelerates the oxidative deterioration of the oil.Online purification can remove all kinds of impurities in the oil in time, extend the service life of the oil for more than 10 years, greatly reduce waste oil emissions, and greatly improve the environment and cost efficiency.
                                                                                                           
         
Filfilter oil is the general term of hydrophobic material for liquid at room temperature and hydrophobic material for liquid at room temperature.Generally divided: (1) vegetable oil; (2) animal oil; (3) mineral oil; (4) essential oil (essential oil).Filfilter mineral oil is oil, shale oil and its products.Its main component is the hydrocarbons.Most numbers are volatile and can be distilled or fractionated and then processed to obtain gasoline, kerosene, lubricants, etc.The oil filters we are talking about are commonly used as industrial oil, or mineral oil.The filter mineral oil is mainly extracted from underground, and its main component is alkane.Most crude oil essentially contain sundries, and a few exceptions (such as Libyan crude) contain more sulfur and other substances.Mineral oil is a very important raw material in the organic chemical industry.

上一篇:The diaphragm press is used in the dye industry

下一篇:The hydraulic system of the van filter has a hydraulic stati