What is the reason for the filter room of the van filter?

  For the leakage of the van filter, little impact on the van filter quality, some equipment waste some work; big affect the overall work of the press, and even cause serious consequences of the impact of the overall filter.
  There are many reasons for leakage of van filter chamber, such as van filter or diaphragm filter.If this problem is to be resolved, take the cause accordingly.
  The press filter chamber is formed from multiple square individual filter plates that are pressure-activated.When this plays a vital role-the pressure, when it cannot reach the range, it naturally affects the state of the filter plate, which naturally affects the filter chamber of the device.If the pressure is less than the required amount, the capacity of the filter plate and the filter plate is naturally less than the power of the filter itself, so it flows out of the gap of the filter plate, and even causes spray phenomenon.Therefore, for this reason, when the filter room leak is found, the first thing to check is the equipment pressure system problem, to see if it has enough pressure or the screws are not stuck, etc.It is worth mentioning that when the hydraulic oil is insufficient, this is also one of the reasons for the small hydraulic system impact.
  In addition to insufficient pressure, damage to the filter plate itself also accounted for the filter leak.Because the filter works in a long-term, harsh environment, the filter plate is also released and the filter cake is removed.This complex and repetitive work will inevitably inadvertently cause some damage to the filter plate, such as the grooves or wear on the edge of the filter plate, and the sealing of the filter chamber is mainly achieved by the convex edge around the filter plate.When there are grooves or severe wear, the pressure generated by the equipment is not sufficient to cause the sealing of the filter chamber.Of course, the filter will leak during work.Therefore, we need to replace the filter plates.